Monthly Archives: September 2012
84315 TRF511 Chassis Upgrade Set – should be released in December.
No info on the contents yet.
A similar TRF502X Upgrade Set was just recently released (see below).
Since that set consists of many of the latest option parts released for the TRF502X one can assume that the TRF511 Upgrade Set will include the lately released TRF511 option parts.
84310 TRF502X Chassis Upgrade Set
This new option part for the TRF 502X was conceived from the latest race data gathered by the TRF team. The Upgrade Set conveniently includes various newly-designed parts to further enhance the performance level of the TRF502X and enable a wider range of setting possibilities.
Specs & Features
The new carbon front/rear upper decks have new shapes to increase chassis rigidity.
The new Aluminum Upper Arm Mounts optimize the camber angles for improved suspension movement.
The new Carbon Rear Damper Stay has refined damper attachment positions to offer better ground clearance and rebound stroke setup options.
Aluminum Rear Suspension Mounts allow rear toe-in angle adjustment.
Universal Propeller Shafts feature axle rings to help prevent shafts from coming off.
2.5mm Thick Carbon Front Upper Deck (New)
2.5mm Thick Carbon Rear Upper Deck (New)
3.5mm Thick Carbon Rear Damper Stay (New)
Aluminum Upper Arm Mount (x 4pcs.) (New)
Aluminum Rear Sus Mount (3.5/Narrow) (New)
Aluminum Rear Sus Mount (2.5/Wide) (New)
Item 54404 DB02 Universal Propeller Shaft Screws included.
1/10 R/C Volkswagen Golf24 (TT-01 Type-E)
1/10 R/C BMW M3 E30 Sport Evo Jägermeister
1/10 R/C Mitsubishi Lancer Evolution VII
1/10 R/C Subaru BRZ R&D Sport (TT-01 Type-E)
1/10 R/C Subaru BRZ R&D Sport (TA06)
1/10 R/C Subaru BRZ (TT-01 Type-E)
1/10 R/C Nissan R390 GT1 (TT-01 Type-E)
1/10 R/C Aero Avante (DF-02)
1/10 R/C Toyota 86 Drift Spec
(TT-01D Type-E) (Tentative)
1/10 R/C Asterion (XV-01T)
1/10 R/C Fighter Buggy SV (DT-02)
1/10 R/C M-06R Chassis Kit (Limited Edition)
FF-03 Chassis Upgrade Set (Limited Edition)
XB Bush Devil II
XB Subaru Impreza WRX STI Team Arai
XB Fast Attack Vehicle w/Shark Mouth
XB Mercedes-Benz Unimog Series U900 (CC-01) Orange Version
XB BMW M3 E30 Sport Evo Jägermeister
XB Mitsubishi Lancer Evolution VII
XB Subaru BRZ R&D Sport (TT-01 Type-E)
XB Subaru BRZ (TT-01 Type-E)
XB Nissan R390 GT1 (TT-01 Type-E)
[TRF] TRF417-3 Chassis Kit (Tentative)
[TRF] Wrench for Aluminum Turnbuckles
[TRF] 42mm Double Cardan Joint Shaft (2pcs.)
[TRF] Pinion Gear Holder 12
[TRF] 2mm Hex Wrench Bit for Electric Screwdriver
[TRF] 7mm Box Wrench Bit for Electric Screwdriver
[TRF] 2mm Hex Ball Point Wrench Screwdriver
[TRF] Aluminum Body Adjuster Mount
SP 1/10 Scale R/C Sand-Viper Body Parts Set (TRF201/DT-02)
OP Active Steering Assist Unit TGU-01
OP Silicone Diff. Oil #500000
OP Silicone Diff. Oil #1000000
OP RM-01 Ground Clearance Gauge
OP Steel Cup Joint (L/R) for TRF417 Gear Differential Unit II
OP RM-01 Carbon Rear Shaft
OP Steel Bevel Gears for TA06 Gear Differential Unit
OP TA06 Aluminum Rear Upright (0°)
OP DT-02 Carbon Damper Stay (Front)
OP DT-02 Carbon Damper Stay (Rear)
OP DB02 Aluminum Rear Suspension Mount
OP DB02 Aluminum Rear Suspension Mount
OP DB02 Aluminum Upper Arm Mount (2pcs.)
OP DB02 Carbon Damper Stay (Rear)
OP TRF201 Suspension Weight Block (0°)
OP TRF201 Suspension Weight Block (5°)
OP DB02 Aluminum Rear Suspension Mount (Rear)
OP RM-01 Front Skid Angle Spacer Set
(w/4mm Titanium Screws)
Translated product info for 84314 FF-03 Upgrade Set.
For users who want more advanced settings appeared “FF-03 upgrade set”! !
While the one-make race FF-03 chassis Tamiya Grand Prix show a surge in various parts of the country, such as the Challenge Cup, to achieve further driving up a notch “FF-03 upgrade set” appeared! 2.25mm thick carbon main chassis not only is it, I aim to concentrate the mass balance change to parallel a similar type TA06 IFS link. Achieve a natural steering feel as long tie-rod system similar TRF417 steering system further as well. Ease of replacement battery is also compatible with high rigidity chassis by fastening the front and rear chassis by carbon and aluminum stays vertical frame of the battery again. Mechanical plate on both sides is also conscious design chassis roll in different parts made of carbon.
FF-03 upgrade set content
2.25mm thick Carbon Lower Deck
Carbon Front Steph Nadu 2.25mm thick
Carbon vertical frame 2.25mm thickness
Carbon mecha deck thickness 2.25mm (L / R)
Bulkhead aluminum stays (F / RF / RR)
· ー Suteruna aluminum stays
Aluminum battery stopper
Aluminum steering link
TA06 N-parts, etc.
※ The image is an example of installing the upgrade parts.
Reclassification or equal parts of the following FF-03 chassis is required.
-Drive system (ball diff, Giyadefu) and FF-03 Gear box
Parts and FF-03 M (damper stays, rear bulkhead)
Short Ribasasu around (suspension arms, uprights, C hub and upper arms)
Universal shaft, rear axle freewheel
· TRF damper
High Torque Servo Saver
· FF-03 urethane bumper parts, such as B (body mount)
More translated info. To add to what we already knew, the 417WX looks to include the new steel gear diff joints.
Achieve his third consecutive World Championship IFMAR! Appearance specification car world champion has evolved the ultimate!
Was held in the Netherlands in July at “ISTC class world championship IFMAR”, has achieved great record third straight as a team by the hands of the Jirusu-Gurosukanpu which entered from (Tamiya Racing Factory) TRF, that domination of the world for the fifth time in total .
This release of “TRF417-3” is the latest spec machine fought world championship.
Carbon 2.25mm lower deck of the flat type is also aimed at rectifying effect at low speeds in excess of 100 kilometers per hour, 2.0mm Carbon Upper Deck of shape it to match the new design.
In addition, the symmetry properties of design which pursued the role evolving into something completely new and I even stay servo.
I became a left and right integral machined aluminum was floating outside.
Developed a new type aeration oil dampers to achieve a supple suspension to maximize the grip of the tire and control.
Modifiers, such as mounting holes that are based on location and additional mount, the feedback from the battle to suppress the fluttering resetting hole position, 3.5mm carbon damper stay front and back of the body as well have been made.
We aim to win the following equipment fulfilling double cardan drive shaft to exert a profound effect when using a direct drive front, Diff Joint Cup made of steel, such as fluorine seal bearing course.
Upper / Rowadekki
Upper biography and promote Rowadekki of flat shape with a view to the aerodynamic characteristics of the ultra-high-speed range, the adjustment of balance and roll stiffness of the vehicle body.
Integrated servo mount
Aluminum has a shape that connects the left and right servo mount.
Are floating outside, put the side mounting fixing pin.
Aeration newly developed type of touring car damper size in order to maximize the effect “argument damper so-called”.
Pre-coated cylinder HL.
Some details in the translated text below. Basically the only thing not confimed before is that it seems the car will include the excellent TRF double-joint front driveshafts. Very good! Other than that; lower deck 2.25mm, upper deck 2.0mm, one-piece floating servo mount, new aeration dampers and TRF fluorine sealed bearings as always.
Translated pre-release info:
Will be released December 2012.
Achieve his third consecutive World Championship IFMAR!
Appearance specification car world champion has evolved the ultimate!
It is the latest spec machine that played a third straight.
Carbon 2.25mm lower deck of the flat type is also aimed at rectifying effect of ultra-high-speed range,
2.0mm Carbon Upper Deck of shape it to match the new design.
In addition, the servo stays, evolved into a new shape of machined aluminum one-piece left and right I was floating outside the pursuit of roll characteristics.
In addition to the development of new aeration type oil dampers, such as fluorine double cardan drive shaft seal and bearings
I will be the ultimate and full equipment based on feedback from combat to “417” Chassis.
Hmm, wonder what this is? 😉
84314 FF-03 Upgrade Set (RC Model)
Release Date : Dec
Price : 22,800 yen
Different version of XV-01 chassis?
58552 XV-01T (RC Model)
Release Date : Nov
Price : 26,800 yen
84312 M-06R Chassis Kit (RC Limited) (RC Model)
Release Date : Dec
Price : 26,800 yen
42239 TRF Drive Shaft for Double Cardan (42-Size 2pcs) (RC Model)
42242 TRF 2mm Hex tip for electric driver (RC Model)
42243 TRF 7mm Box chip for electric driver (RC Model)
42244 TRF 2mm Hex Ball wrench (RC Model)